Cellulose or glass fibre for blowing into an Ottawa attic?
Cellulose or glass fibre for blowing into an Ottawa attic?
Ontario's Building Code lists accepted standards for both cellulose and mineral fibre insulation, so the choice comes down to what each gives and costs. The published price range for blown-in attic insulation is about $1.50 to $3.00 per square foot of attic floor (published 2025-2026 estimates); ask for the area on the quote.
The main difference that affects your decision is the R-value per inch. Natural Resources Canada lists blown cellulose (settled) at R-3.6 per inch and blown glass fibre at R-2.9 per inch. Blown mineral fibre is listed at about R-3. Products of the same class vary, and Natural Resources Canada notes that a long-term value claimed above about R-6.5 per inch may not be substantiated. None of these figures are Code requirements; they are design values for comparing materials.
What moves the price within that range is the area of your attic in square feet, the material chosen, the target R-value, and whether old insulation is removed first. If there is existing insulation that needs to come out, removing clean material runs about $0.75 to $2.00 per square foot before any contamination work. If the existing insulation is vermiculite, Health Canada advises not to disturb it and to hire a professional to test for asbestos before any renovation work; that work belongs to a different specialist.
The Code requires that loose-fill insulation not restrict the free flow of air through the attic, and that it not block soffit vents where those are present. Where preformed baffles are used at the eaves, they keep an unobstructed air space of at least 25 mm and extend at least 50 mm above the top of the insulation. Ask the contractor how they plan to protect the soffit vents and what they use at the eaves.
A complete quote for this job should state:
- the material (cellulose, glass fibre or mineral fibre) and the brand or product
- the attic area in square feet
- the finished depth and the R-value that depth achieves for that specific product
- whether any existing insulation is removed first, and what happens if vermiculite is found
- who is responsible for confirming whether a permit is needed with the City
Related service: Attic Insulation What it costs: Attic insulation
Want this done at your place?
Tell us which part of the house you want insulated and we'll send it to local Ottawa insulation contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.
R-Value IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.
Ready to Get Quotes?
Find local insulation contractors in Ottawa. Free matching, no obligation.