Free Insulation Contractor Matching Attics, Walls, Basements & Spray Foam Attics, Walls & Basements Across Ottawa
Find an Insulation Contractor
Costs & Pricing | 0 views |

Two attic quotes in Hunt Club differ a lot: what should I compare?

Question

Two attic quotes in Hunt Club differ a lot: what should I compare?

Answer from R-Value IQ

When two attic quotes differ a lot, start by checking whether they describe the same job. A price difference means little until the scope on each page matches.

What to line up side by side

Start with the material and where it goes. One contractor may be quoting blown cellulose, another blown glass fibre, and a third mineral fibre batt. Natural Resources Canada gives these design values per inch: blown cellulose (settled) R-3.6, blown glass fibre R-2.9, blown mineral fibre R-3. The same finished depth produces a different R-value depending on which product goes in, so the quote needs to name the material and the target R-value, not just the depth.

Check the area each contractor is pricing, in square feet, and which parts of the roof space it covers, so you are comparing the same attic.

Look at what each quote includes beyond the insulation itself:

  • Air sealing at pot lights, plumbing stacks, electrical boxes and the attic hatch before the insulation goes in
  • Baffles at the eaves to keep the soffit vents clear and maintain the air space the Building Code requires between the insulation and the roof sheathing
  • Whether the attic hatch is being insulated and weatherstripped
  • Removal of old insulation, if any, and whether a check for vermiculite is part of the scope
If the existing insulation might be vermiculite, Health Canada says to assume vermiculite produced before 1990 may contain some asbestos and not to disturb it until a professional has tested it. Ask each contractor how that check fits into the job before any work begins.

Finally, look at what each quote says about the vapour barrier. Ontario's Building Code requires a vapour barrier on the warm side of insulated assemblies, with a permeance no higher than 60 ng/(Pa·s·m²). If one contractor is replacing or repairing the vapour barrier and another is not, the scopes are different.

Once the scopes match, the remaining price difference comes down to the material, the area in square feet, the finished thickness and target R-value, and whether old insulation is being removed first. Those are the only factors you need to ask each contractor to explain.

Make sure the quote you accept states the material, the area, the finished R-value, the air sealing and baffle work, the vapour barrier treatment, and the start and completion dates, all in writing before you sign.

Ottawa Insulation Contractors

Want this done at your place?

Tell us which part of the house you want insulated and we'll send it to local Ottawa insulation contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.

Fields marked are required.

We won't call you. There's no phone box above because we don't ask for one — your estimate comes by email, on your time.

Request received We’ve sent your details to local Ottawa insulation contractors. Interested contractors reply by email. A confirmation is on its way to your inbox.

R-Value IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.

Ready to Get Quotes?

Find local insulation contractors in Ottawa. Free matching, no obligation.

Find an Insulation Contractor