Can I spray foam under the roof deck of my Kanata house?
Can I spray foam under the roof deck of my Kanata house?
For an unvented, spray-foamed roof, Natural Resources Canada advises: do not proceed without approval from your building inspector, and then only use a certified spray foam contractor who is familiar with the process. We found no City of Ottawa page that names this job, so ask the City first. Separately, Ontario's Building Code says spray-applied polyurethane insulation shall be installed in accordance with CAN/ULC-S705.2; ask any contractor for proof that their installation meets that standard.
The Building Code rule on foam plastics is relevant here. Foamed plastics that form part of a wall or ceiling assembly must be protected from the rest of the building by an interior finish, such as drywall or another thermal barrier the Code accepts, except where they face concealed spaces inside attics or roof spaces. How that applies to your specific roof geometry is a question for the City's Building Code Services and your contractor before the job is designed, not after.
For a new house or addition in Kanata, the Code's energy standard for housing, SB-12, sets a minimum of R-60 for a ceiling with an attic space, or R-31 for a ceiling without an attic space, under Package A1. Ask your designer which applies to the roof you are planning. For an existing house being renovated, the Code's Part 11 says the performance of an altered system must be at least equal to what it was before the work; we found no Code number that sets a target R-value for voluntarily upgrading an existing roof assembly.
Published 2025-2026 price pages put closed-cell spray foam at roughly $2.75 to $7.00 per square foot, higher with thickness. We found no two independent published sources for open-cell applied to a roof deck on its own, so no range is given here.
A few things to confirm with any contractor before the job is priced:
- whether the assembly will be closed-cell or open-cell, and what finished thickness and R-value they are proposing
- how the foam will be covered to meet the thermal barrier requirement, and who confirms that detail with the City
- whether the existing attic venting will be sealed or modified, and what the plan is for that
- proof that their installation process meets CAN/ULC-S705.2
Related service: Spray Foam Insulation What it costs: Spray foam
Want this done at your place?
Tell us which part of the house you want insulated and we'll send it to local Ottawa insulation contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.
R-Value IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.
Ready to Get Quotes?
Find local insulation contractors in Ottawa. Free matching, no obligation.