Glass fibre batts in Ottawa walls: how much R-value per inch?
Glass fibre batts in Ottawa walls: how much R-value per inch?
Natural Resources Canada lists glass fibre batt at R-3.2 per inch. That is a design value; Natural Resources Canada notes that products of the same class vary, so the actual value depends on the specific product installed.
For walls, ask the contractor what total R-value the batts will give in your wall cavities, and whether any continuous insulation is part of the proposal. Ontario's Building Code says batts must fill the full width and length of the space between the framing and give a reasonably uniform insulating value over the whole face (9.25.2.3). When a renovation opens walls, the renovation rule is that the work cannot leave the house worse than before (11.3.1.1), and where the framing being altered matches the existing framing, lesser amounts of insulation and vapour barrier are acceptable (C207).
If the walls are already closed, Ontario's Building Code permits loose-fill insulation in the wood-frame walls of existing buildings (9.25.2.4.(3)), and its note on that clause warns that adding insulation to existing walls increases the likelihood of moisture damage to framing and cladding. The note suggests sealing openings, applying a low-permeability paint to the inside surface, and checking and repairing siding, flashing and caulking before the work goes in.
If the walls are open, a quote for glass fibre batts should spell out the product's R-value per inch, the total thickness being installed, the finished R-value of the assembly, and what air sealing and vapour barrier work is included. Ontario's Building Code puts the vapour barrier on the warm side of the assembly (9.25.4.3).
Before you sign, get the batt product, the R-value per cavity and the vapour barrier details written into the quote.
Related service: Batt Insulation in Open Walls
Want this done at your place?
Tell us which part of the house you want insulated and we'll send it to local Ottawa insulation contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.
R-Value IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.
Ready to Get Quotes?
Find local insulation contractors in Ottawa. Free matching, no obligation.