Free Insulation Contractor Matching Attics, Walls, Basements & Spray Foam Attics, Walls & Basements Across Ottawa
Find an Insulation Contractor
Attics & Venting | 0 views |

What R-value do new Ottawa houses get in the attic?

Question

What R-value do new Ottawa houses get in the attic?

Answer from R-Value IQ

New Ottawa houses and additions get R-60 in a ceiling with an attic space under package A1 of SB-12, the Building Code's energy standard for housing; packages A3 and A5 allow R-50. These values are for new houses and additions only.

Where the number comes from

Ontario's Building Code does not use Section 9.36 for houses. Instead, it sends residential energy efficiency to SB-12, which divides the province into two climate zones at 5,000 heating degree-days. Ottawa falls in Zone 1, with City Hall measured at 4,440 degree-days and Barrhaven, Kanata and Orleans in the 4,500 to 4,520 range. For a new house with a gas furnace or boiler of at least 92% efficiency, Zone 1's package A1 sets the attic ceiling at R-60. For new houses, other SB-12 packages allow R-50 in the attic together with other upgrades.

For a new house, a ceiling without an attic space gets R-31 under SB-12. Additions follow their own SB-12 table and also require R-60 in the attic.

These are minimum nominal values for the insulation itself. In new work, the rim joist gets at least the above-grade wall value, which under package A1 is R-22.

A few things the builder and insulation contractor need to sort out alongside the R-value:

  • Attic venting: the Code requires a ventilated air space between the insulation and the roof sheathing, with vent area at least 1/300 of the insulated ceiling area, at least 25% at the top and 25% at the bottom.
  • Baffles at the eaves to keep the vent channel open and stop insulation from blocking soffit vents.
  • A continuous air barrier and a vapour barrier on the warm side of the assembly, with all penetrations sealed.
For an existing house that is not being added to, SB-12's new-construction values do not set a required R-value for topping up the attic. We found no Code number for voluntarily upgrading insulation in an existing attic.

If you are building new or adding on, ask which SB-12 package the house is designed to, since the packages trade the attic value against other parts of the house, and ask for the finished depth and the R-value it gives in writing.

Local Ottawa insulation contractors are listed in the Ottawa Construction Network directory, and the request form on this page is a straightforward way to reach them.

Ottawa Insulation Contractors

Want this done at your place?

Tell us which part of the house you want insulated and we'll send it to local Ottawa insulation contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.

Fields marked are required.

We won't call you. There's no phone box above because we don't ask for one — your estimate comes by email, on your time.

Request received We’ve sent your details to local Ottawa insulation contractors. Interested contractors reply by email. A confirmation is on its way to your inbox.

R-Value IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.

Ready to Get Quotes?

Find local insulation contractors in Ottawa. Free matching, no obligation.

Find an Insulation Contractor