Free Insulation Contractor Matching Attics, Walls, Basements & Spray Foam Attics, Walls & Basements Across Ottawa
Find an Insulation Contractor
Spray Foam | 0 views |

Closed-cell spray foam in an Ottawa wall: R-value per inch?

Question

Closed-cell spray foam in an Ottawa wall: R-value per inch?

Answer from R-Value IQ

Closed-cell polyurethane spray foam carries a Natural Resources Canada design value of R-6 per inch. That is the figure to use when comparing thicknesses or checking whether a target R-value can be reached in a given wall cavity.

Natural Resources Canada notes that products in the same class vary, and that any long-term R-value claimed above about R-6.5 per inch may not be substantiated. If a contractor's quote or product sheet shows a higher number, ask for the supporting data.

For a new house or addition, the Code's energy standard for housing, SB-12, sets above-grade wall minimums for Zone 1 (Ottawa's climate zone under SB-12). Package A1, for a gas furnace or boiler of at least 92% efficiency, requires R-22 for above-grade walls in a new house or addition. Other packages allow R-19 plus R-5 continuous insulation, R-14 plus R-7.5 continuous insulation, or R-22 plus R-5 continuous insulation. Those values are for new houses and additions only. We found no Code number that sets an R-value for adding insulation to an existing wall.

Ontario's Building Code, at 9.25.2.5.(1), states that spray-applied polyurethane insulation shall be installed in accordance with CAN/ULC-S705.2. That standard sets installer requirements, so ask for proof that the person doing the work meets it.

One more thing worth knowing: the Code's note on 9.25.2.4.(3) says that adding insulation to existing wood-frame walls increases the likelihood of damage to framing and cladding from moisture accumulation, and it points to sealing openings, applying a low-permeability paint to the inside surface, and checking siding, flashing and caulking before the work begins. Ask the contractor what they will do about each of those before the wall is opened.

When you have two written quotes in front of you, line up the material named, the total area being sprayed, the finished thickness in the cavity, and the resulting R-value, so you are comparing the same scope of work rather than two different numbers on a page.

Ottawa Insulation Contractors

Want this done at your place?

Tell us which part of the house you want insulated and we'll send it to local Ottawa insulation contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.

Fields marked are required.

We won't call you. There's no phone box above because we don't ask for one — your estimate comes by email, on your time.

Request received We’ve sent your details to local Ottawa insulation contractors. Interested contractors reply by email. A confirmation is on its way to your inbox.

R-Value IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.

Ready to Get Quotes?

Find local insulation contractors in Ottawa. Free matching, no obligation.

Find an Insulation Contractor