Free Insulation Contractor Matching Attics, Walls, Basements & Spray Foam Attics, Walls & Basements Across Ottawa
Find an Insulation Contractor
Materials & R-Values | 0 views |

Foam board on an Ottawa house: what R-value per inch does XPS give?

Question

Foam board on an Ottawa house: what R-value per inch does XPS give?

Answer from R-Value IQ

Extruded polystyrene board (XPS) gives R-5 per inch, according to Natural Resources Canada's design values.

That figure is for the material itself. A few things shape how it translates into a finished assembly. XPS is a rigid board, so the R-value you reach depends on the thickness of board you can fit in the space available, whether you are stacking layers, and whether the installation leaves any gaps at edges or penetrations. Natural Resources Canada notes that products of the same class vary, and that any long-term claim above about R-6.5 per inch may not be substantiated.

For comparison, Natural Resources Canada lists other rigid boards: expanded polystyrene Type I runs R-3.8 per inch, Type II R-4, and polyurethane board R-6. Closed-cell spray foam also reaches R-6 per inch. Those are all Natural Resources Canada design values, not Code minimums.

If your project involves a new house or an addition, the Code's energy standard for housing, SB-12, sets minimum values for the whole assembly, not just the board. For a new house in Ottawa (Zone 1 of SB-12), above-grade walls call for R-22, and basement walls call for R-20 ci, meaning continuous insulation. Where XPS is used as the continuous layer, the board thickness has to add up to that target. Those values apply to new houses and additions only.

For an existing house, the Code's Part 11 renovation rule says a materially altered building system must perform at least as well afterward as it did before. We found no Code number that sets a minimum R-value for voluntarily adding foam board to an existing wall or basement. What the assembly has to meet depends on what is being altered and how, which is a question for the City's Building Code Services or the contractor doing the work.

A quote for foam board work should name the product, the thickness in millimetres, the R-value per inch and the total R-value of the finished layer, the area being covered, and how joints, edges and penetrations will be sealed. If a vapour barrier is part of the assembly, that should be spelled out as well. Under Ontario's Building Code, insulated walls separating heated space from outside air or the ground require both an air barrier system and a vapour barrier on the warm side.

Ask for the board product, its thickness and the finished R-value of the layer to be written into the contract.

Ottawa Insulation Contractors

Want this done at your place?

Tell us which part of the house you want insulated and we'll send it to local Ottawa insulation contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.

Fields marked are required.

We won't call you. There's no phone box above because we don't ask for one — your estimate comes by email, on your time.

Request received We’ve sent your details to local Ottawa insulation contractors. Interested contractors reply by email. A confirmation is on its way to your inbox.

R-Value IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.

Ready to Get Quotes?

Find local insulation contractors in Ottawa. Free matching, no obligation.

Find an Insulation Contractor